Eura Drives E600-0007S2Q1, E600 Frequency Inverter, 1 in 3 out, 230V, 4.5A, 0.75KW, 1HP
Regular price
$420.81
Pickup available at 220 Alden Road
Usually ready in 24 hours
Use this text to encourage communication or promote sharing on social networks.
Best performance/cost ratio, without compromise in reliability and quality
Compact design, easy to integrate in your environment: DIN rail mounting, contactor-style I/O
Easy to setup: Simple set of optimized parameters for all basic functions and applications
PID and HVAC functions - safety integrated - MODBUS - open for networking
Internal EMC filter as standard: Ready for CE market
Economical mass production on high automated and dedicated SMT lines
General purpose drive - made for the worldwide market (CE/UL/CCC)
Approved and certified by European independent bodies
| Power supply | |
| Rated voltage | 3-phase 380…460V +/- 15% - 1-phase 200…240V +/- 15% |
| Input frequency | 44….67 Hz |
| EMC filter | Integrated for 2. environment |
| Output | |
| Output voltage | 0………V-input |
| Output frequency | 0.5………650 Hz |
| Resolution of output frequency | 0,01 Hz |
| Overload capability | 150% - 60 sec. / 10 Min |
| Control-Mode | |
| PWM control-modes | V/Hz - Mode |
| PWM frequency | 0,8.....6 kHz |
| V/Hz characteristic | Linear, quadratic, and user-programmable curve |
| Starting torque | 100% rated torque at 1 Hz |
| DC-Brake | Freq. threshold, duration and intensity programmable – DC injection |
| Brake chopper | Integrated chopper transistor |
| Display | |
| 7 Segment LED display -4- digit | For programming and visualization of different operating parameters |
| I/O Channels, control functions | |
| Inverter control - Start/Stop | To configure: terminals / operation panel / serial link |
| Digital control inputs | 4 digital inputs (HIGH/LOW configurable) |
| Speed reference signal | Potentiometer, analogue input (terminals 0...10V, (0)4...20 mA), operating panel keys, serial link |
| Reference analogue channels | 1 Analogue channels 0…10V, (0)4....20 mA |
| Analogue outputs | 1 analogue output channel programmable in gain, different functions to assign (0…10V) |
| Digitale outputs | 1 digital output (OC, different functions to assign) |
| Relays output | 1 switchover contact 3 A 230 V (programmable for different functions) |
| Interface | Serial link (MODBUS – ASCI/RTU) |
| Special function - control options | Jog mode, 12V / 50 mA auxiliary power supply on terminals PI-control Fixed frequency control, programmable cycling frequency sequence AUTORESET/RESTART function |
| Protection functions, incl. fault memory | |
| Electrical protection functions | Overvoltage, Undervoltage Overcurrent, Overload, Motor-Overload, Output-short Analogue reference interruption |
| Thermal protection functions | Heatsink overtemperature |
| Optionals | |
| Operating panel | Remote keypad |
| Brake resistors | Braking resistors for heavy duty operation |
| Filter / chokes | PFC chokes – dv/dt limiting output filter - sinusfilter |
| Parameter copy stick | USB Stick with parameter dublication function |
| PC-Link Software (via MODBUS) | Special tool for programming, control and diagnostic (parameter set memory) |
| Safety | STO (Q2 only) |
| Environmental conditions | |
| Protection | IP21 |
| Operating temperature | -10……+40 °C |
| Humidity | Max. 90 % not condensing, no corrosion |
| Elavation | 1000 m - 1% derating / 100m above |
| Vibration | Max. 0,5 g |
| Power range | |
| V/Hz | 230V: 0,2…2,2 kW 400V: 0,2…5,5 kW |
| Standards | |
| EMC | EN61800-3(2004) |
| Safety | EN61800-5-1 2003 |
