Hubbell FDS30, Circuit-Lock Fused Disconnect Switch, 30A 600V AC, 3-Pole
Regular price
$2,207.34
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
The Circuit-Lock Fused Disconnect Switch provides fused switched control of a directly wired load. The switch cannot be turned ON unless the enclosure cover is closed. The fuses cannot be accessed until the switch is turned OFF. The fuse holder accepts Class “J” fuses. This enclosure is non-metallic and is listed for Outdoor/Indoor (Type 4X Wash down, Corrosion resistant). The handle can be locked in the OFF position to comply with OSHA Lockout/Tagout regulations.
| Amperage Rating | 30A |
| Horsepower - Maximum | 20 |
| Ingress Protection | IP66 |
| Enclosure Material | PBT |
| Frame & Ground Plate | Galvanized Steel |
| Enclosure Gasket | Neoprene |
| Enclosure Screws | Stainless Steel 300 Series |
| Conduit Hub | Zinc, 1 in. |
| Dielectric Voltage | Withstands 3000V AC minimum |
| Max. Working Voltage | 600V AC RMS |
| Impact Resistance | In accordance with UL 746C |
| Mounting | External fully adjustable feet |
| Flammability | UL94-5VA and V0 Classification |
| Moisture Resistance | UL Type 4X, 12 |
| Operating Temperature | Max. Continous: 75°C; Min. Continuous: -40°C without impact |
| Dimensions |
15.36 in x 11.46 in x 8.43 in |
| Certifications and Compliance | UL 50E |