Littelfuse 111-INSIDER-P, 111-Insider-P Series, Single-Phase Pump Monitor, Voltage Sensing AC 115VAC, 1 Phase, 1 ⁄3–1 hp includes IR Kit-12
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
The single-phase 111-Insider-P monitor fits inside 1⁄3 and 1⁄2 hp, 115 V control boxes. It is designed to protect single-phase, submersible pumps from dry-well, dead-head, jammed impellers, rapid-cycle, overvoltage, and undervoltage conditions. A calibration adjustment allows the Insider to be calibrated to your specific pumping applications, reducing the possibility of false or nuisance tripping. A unique microcontroller-based voltage and current-sensing circuit constantly monitors the incoming power for fluctuations, overcurrent, and undercurrent. When an abnormality such as loss of suction is detected, the product deactivates its output relay and directly disconnects the pump motor. The relay then begins its user-selectable restart delay (dry-well recovery) timer. When the timer counts to zero or power is removed and reapplied, the relay reactivates its output relay and turns the pump back on. By leaving the restart delay knob in the reset position, the relay will operate in manual reset mode.
The Insider communicates with a hand-held diagnostics tool called the Informer (sold separately). The Informer displays parameters including calibration points, trip points, run time and last faults. An IR Kit-12 (12” fiber optic kit) is included with each Insider, allowing the Informer to access these parameters even when the Insider is enclosed in a control box. This is valuable for troubleshooting the pump while it is running.
Functional Specifications | |
Adjustments/Settings | |
Overcurrent | 125 % of calibration point |
Underload (dry-well) | Adjustable (70 to 90 % of calibrated run power |
Overvoltage | 132.5 V ac |
Undervoltage | 95 V ac |
Number of restarts allowed in a 60-sec. period (rapid-cycling) |
4 |
Trip Delay Times |
Overcurrent 5 seconds Dry-well 4 seconds |
Restart Delay Times |
Over/Undervoltage 2 seconds All other faults Manual, 2–25 minutes |
Input Characteristics | |
Supply Voltage | 115 V ac |
Load Range | 1 ⁄3–1 ⁄2 hp |
Frequency | 50/60 Hz (Note: 50 Hz will increase all delay timers by 20 %) |
Output Characteristics | |
Output Contact Rating-SPST | 1 ⁄2 hp @ 120 V ac (17 A max.) |
General Characteristics | |
Operating Temperature | -40 °C to 55 °C (-40 °F to 131 °F) |
Maximum Input Power | 5 W |
Weight | 10 oz. |
Mounting Methods | Inside a Pentek*, Franklin*, CentriPro*, Grundfos* (mfg after mid-2014), Flowise Pro,* and Flint and Walling* control box |
Certification & Compliance | cURus |