Littelfuse COM 4-20, COM Series,Analog Communication Link for Model 777-AccuPower Relay
Regular price
$395.93
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
The COM 4-20 Output Module is intended for use with ONLY the Model 777-AccuPower output power monitor. The module will send a 4-20mA signal proportional to the output power. It can also be used to send the input power by setting the efficiency setting on the 777-AccuPower monitor to one. This module allows communication to a PLC with an analog input and no Modbus input.
Pre-order 6-8 Weeks
Output Characteristics | |
Current | 4-20mA |
General Characteristics | |
Temperature Range | -20° to 50°C (-4° to 122°F) |
Terminal (depluggable terminal block) | |
Torque | 3 in.-lbs. (max.) |
Wire AWG | 12-20 AWG |
Class of Protection | IP20 |
Relative Humidity | 10-95%, non-condensing per IEC 68-2-3 |
Standards Passed | |
Electrostatic Discharge | IEC 61000-4-2, Level 3, 6kV contact, 8kV air |
Radio Frequency | Immunity, Radiated 150 MHz, 10V/m |
Fast Transient Burst | IEC 61000-4-4, Level 3, 4kV input power |
Hi-Potential Test | Meets UL508 (2 x rated V + 1000V for 1 min) |
Surge |
Input Power IEC 61000-4-5, Level 1 Inputs/Data Lines IEC 61000-4-5, Level 2 |
Safety Marks |
UL UL508 (File #E68520) CE IEC 60947 |
Enclosure | Polycarbonate |
Dimensions |
H 52.83 mm (2.08”) W 73.66 mm (2.9”) D 19.56 mm (0.77”) |
Weight | 0.25 lb. (4 oz., 113.4 g) |
Mounting Method | #8 screws; mount to side of 777-AccuPower unit |