Littelfuse FS219-45, FS200 Series, Flasher and Tower Lighting Control, 12VDC, 3A, 45 FPM
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
The FS200 Series may be used to control inductive, incandescent, or resistive loads. Factory fixed flash rate of 45 or 90 FPM or may be ordered with a fixed custom flash rate ranging from 10 to 180 FPM. Encapsulation provides protection against shock, vibration, and humidity. Uniform performance, high inrush current capability, and low RFI, make this series ideal for general industrial applications.
Operation
Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed.
Reset: Removing input voltage resets the output and the sequence to T2.
Pre-order 6-8 Weeks
Technical Data | |
Operation | OFF/ON solid-state flasher (continuous duty) |
Flash Rate | Fixed at 90 FPM ±10% |
ON/OFF Ratio | ≅ 50% |
Custom Flash Rate |
FS219-45: 45 FPM FS224 : 90 FPM |
Input | |
Voltage | 12VDC |
Output | |
Load Type | Inductive, resistive, or incandescent |
Maximum Load Rating | 0.25 - 3A steady state |
OFF State Leakage Current 12 & 24VDC | ≤ 250 µA |
Inrush | 10 times steady state current |
Mechanical | |
Mounting | Surface mount with one #10 (M5 x 0.8) screw |
Dimensions |
H 50.8 mm (2”); W 50.8 mm (2”); D 30.7 mm (1.21”) |
Termination | 0.25 in. (6.35 mm) male quick connect terminals |
Protection | |
Circuitry | Encapsulated |
Environmental | |
Operating/Storage Temperature | -20° to 60°C / -40° to 85°C |
Weight | ≅ 2.2 oz (62 g) |