Littelfuse HRV42SE, HRV Series, 120VAC, Programmable (Multi-Function) Time Delay Relay SPDT (1 Form C) 5 Sec ~ 635 Sec Delay 30A @ 125/240VAC Chassis Mount
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
The HRV combines the accuracy of microcontroller based circuitry with an electromechanical relay output. The HRV’s switching capacity allows direct control of loads like compressors, pumps, motors, heaters, and lighting. The HRV “S” version provides a vend time after the selected number of initiate switch closures to start is reached. The HRV “A” version includes all of the “S” features and allows the total vend time to be extended for each additional initiate switch closure. The HRV is ideal for cost sensitive single coin or token vending machines. The electronic circuitry is encapsulated to protect against humidity and vibration.
Operation
Coin Totalizer & Vending Timer (“S” Version): Input voltage must be applied prior to & during operation. When the total number of S1 initiate switch closures equals the number to start set on the lower 3 DIP switches, the load energizes and the vending time set on the upper 7 DIP switches begins. At the end of the vending time, the load de-energizes and the vending time is reset. Closing the initiate switch during vend timing will have no affect on vend time delay.
Accumulating Vending Timer (“A” Version): Input voltage must be applied prior to and during operation. When the total number of S1 initiate switch closures equals the number to start set on the lower 3 DIP switches, the load energizes and the vending time starts. For every initiate switch closure, the HRV unit adds one time per coin period, as set on the upper 7 DIP switches, to the total vending time
Reset: Removing input voltage resets the vend time delay, the S1 closure counter, and de-energizes the output relay.
Pre-order 6-8 Weeks
Specifications
| Count Functions/ Switch Type | Mechanical (counts on switch closure) |
| Closure Time | ≥ 20ms |
| Minimum Switch Open (between closures) Time | ≥ 20ms |
| Count Range to Start | 1 - 7 counts |
| Maximum Counts (“A” Version) | 250 |
| Time Delay/Range *** | Adjustable 1s - 31.75m in 4 ranges |
| Adjustment | 7 of a 10 position DIP switch |
| Setting Accuracy | 0% to +2% or 50ms, whichever is greater |
| Repeat Accuracy | ±0.1% or 20ms, whichever is greater |
| Reset Time | ≤ 150ms |
| Time Delay vs Temp. & Voltage | ≤ ±2% |
| Input | |
| Voltage | 12 or 24VDC; 24, 120, or 230VAC |
| Tolerance |
12VDC & 24VDC/AC -15% - 20% 120 & 230 VAC -20% - 10% |
| AC Line Frequency/DC Ripple | 50/60 Hz / ≤ 10% |
| Power Consumption | AC ≤ 4VA; DC ≤ 2W |
| Output | |
| Type | Electromechanical relay |
| Form | Isolated, SPDT or non-isolated, SPDT |
| Ratings | SPDT-NO SPDT-NC |
| General Purpose | 125/240VAC 30A 15A |
| Resistive |
125/240VAC 30A 15A 28VDC 20A 10A |
| Motor Load |
125VAC 1 hp* 1/4 hp** 240VAC 2 hp** 1 hp** |
| Life |
Mechanical - 1 x 10⁶ Electrical - 1 x 10⁵, *3 x 10⁴, **6,000 |
| Protection | |
| Surge | IEEE C62.41-1991 Level A |
| Circuitry | Encapsulated |
| Dielectric Breakdown | ≥ 1500V RMS input to output; isolated units |
| Insulation Resistance | ≥ 100 MΩ |
| Mechanical | |
| Mounting | Surface mount with one #10 (M5 x 0.8) screw |
| Dimensions |
H 76.7 mm (3”) W 50.8 mm (2”) D 38.1 mm (1.5”) |
| Termination | 0.25 in. (6.35 mm) male quick connect terminals |
| Environmental | |
| Operating/Storage Temperature | -40° to 70°C / -40° to 85°C |
| Humidity | 95% relative, non-condensing |
| Weight | ≅ 3.9 oz (111 g) |