Littelfuse KSD1123, KSD1 Series, 12VDC, On-Delay Time Delay Relay SPST-NO (1 Form A) 0.1 Min ~ 10 Min Delay Chassis Mount

In stock
SKU: KSD1123
Regular price $90.47
Rated voltage

Use this text to encourage communication or promote sharing on social networks.

You can also add links

The KSD1 Series features two-terminal, series-connection with the load. The KSD1 Series is an ideal choice for delay-onmake timing applications. This series is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid-state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for popular AC and DC voltages. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.

Operation (Delay-on-Make)

Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed.

Reset: Removing input voltage resets the time delay and output.

Specifications

Time Delay
Range 0.1s - 1000m in 6 adjustable ranges or fixed
Type Microcontroller with watchdog circuitry
Repeat Accuracy ±0.5% or 20ms, whichever is greater
Tolerance (Factory Calibration) ≤ ± 5%
Recycle Time ≤ 150ms
Time Delay vs Temp. & Voltage ≤ ±10%
Input
Voltage 24, 120, or 230VAC; 12 or 24VDC
Tolerance ±20%
AC Line Frequency/DC Ripple 50/60 Hz
Output
Type Solid state
Form NO, open during timing
Maximum Load Current 1A steady state, 10A inrush at 60°C
Minimum Holding Current ≤ 40mA
OFF State Leakage Current ≅ 7mA @ 230VAC
Voltage Drop ≅ 2.5V @ 1A
Protection
Polarity DC units are reverse polarity protected
Circuitry Encapsulated
Dielectric Breakdown ≥ 2000V RMS terminals to mounting surface
Insulation Resistance ≥ 100 MΩ
Mechanical
Mounting Surface mount with one #10 (M5 x 0.8) screw
Dimensions H 50.8 mm (2”)
W 50.8 mm (2”)
D 30.7 mm (1.21”)
Termination 0.25 in. (6.35 mm) male quick connect terminals
Environmental
Operating/Storage Temperature -40° to 60°C / -40° to 85°C
Humidity 95% relative, non-condensing
Weight ≅ 2.4 oz (68 g)