Littelfuse PRS65, Single Shot Timer Series, 230VAC, One Shot Time Delay Relay SPDT (1 Form C) 7 Sec ~ 480 Sec Delay 10A @ 400VAC Socketable
Regular price
$195.34
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
The PRS65 is a single shot time delay relay for use on noncritical timing applications. The knob adjustable time delay carries a guaranteed time range of up to 8 minutes.
Operation
Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch (momentary or maintained) the output contacts transfer and the time delay is initiated. At the end of the delay interval, the output contacts revert to their original position. If the initiate switch is reclosed during timing, the time delay will not be affected.
Pre-order 6-8 Weeks
| Time Delay | |
| Type | Analog circuitry |
| Range | 7 to 480 seconds |
| Repeat Accuracy | ±2% under fixed conditions |
| Tolerance | Knob adjustable: guaranteed range |
| Reset Time | 80ms max. |
| Recycle Time |
After timing: 16ms max. During timing: 0.1% of max. time delay or 75ms, whichever is greater |
| Time Delay vs Temp. & Voltage | 15% max. |
| Input | |
| Voltage | 230VAC, nominal |
| Tolerance | ±15% of nominal |
| AC Line Frequency | 50/60 Hz |
| Output | |
| Type | Relay |
| Form | Single Pole, Double Throw |
| Rating | 10 amperes resistive at 240VAC |
| Protection | |
| Transient | ±1500 volts for 150 microseconds |
| Dielectric Breakdown | ≥1500 V rms min. at 60 Hz between input and output terminals |
| Mechanical | |
| Mounting | Plug in (hold-down clips for panel mounting also available) |
| Termination | Standard Octal Plug-in |
| Dimensions |
H 92.2 mm (3.63”) W 60.45 mm (2.38”) D 44.45 mm (1.75”) |
| Environmental | |
| Operating/Storage Temperature | -20° to 65°C / -30° to 85°C |
| Weight | Approx. 6 oz (170 g) |
| Humidity | 95% relative, non-condensing |