Littelfuse TAC1223, TAC1 Series, 24VAC, On-Delay Time Delay Relay SPST-NO (1 Form A) 2 Sec ~ 180 Sec Delay Chassis Mount
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
The TAC1 Series was designed to delay the operation of a compressor relay. It eliminates the possibility of relay chatter due to half-wave failure of the output. It connects in series with the load relay coil and provides a delay-on-make time delay each time input voltage is applied. It can be used for random start, anti-short cycling, sequencing, and many other applications. It is an excellent choice for all air conditioning and refrigeration equipment.
Operation (Delay-on-Make)
Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed.
Reset: Removing input voltage resets the time delay and output
Pre-order 6-8 Weeks
| Time Delay | |
| Type | Analog circuitry |
| Range | 0.05 - 600s in 4 adjustable ranges or fixed |
| Repeat Accuracy | ±2% |
| Tolerance (Factory Calibration) | ±20% |
| Recycle Time | ≤ 20ms after timing, during timing - 0.1% of time delay or 75ms, whichever is greater |
| Time Delay vs Temp. & Voltage | ≤ ±10% |
| Input | |
| Voltage | 24, 120, or 230VAC |
| Tolerance | ±20% |
| AC Line Frequency | 50/60 Hz |
| Output | |
| Type | Solid state |
| Form | NO, open during timing |
| Rating | 0.5A steady state, 10A inrush at 60°C |
| Voltage Drop |
120 & 230VAC: ≅ 4.2V @ 0.5A 24VAC: ≅ 2.5V @ 0.5A |
| Protection | |
| Circuitry | Encapsulated |
| Dielectric Breakdown | ≥ 2000V RMS terminals to mounting surface |
| Insulation Resistance | ≥ 100 MΩ |
| Mechanical | |
| Mounting | Surface mount with one #10 (M5 x 0.8) screw |
| Dimensions |
H 50.8 mm (2”); W 50.8 mm (2”); D 30.7 mm (1.21”) |
| Termination | 0.25 in. (6.35 mm) male quick connect terminals |
| Environmental | |
| Operating/Storage Temperature | -40° to 80°C / -40° to 85°C |
| Humidity | 95% relative, non-condensing |
| Weight | ≅ 2.4 oz (68 g) |